IVAO Connector Software[PDF]

License

This End-User License Agreement ("EULA") is a legal agreement between you and International Virtual Aviation Organisation VZW (“IVAO”).

Please read and comply with the EULA License.

Introduction

The connector software is the IVAO tool which enables to connect several clients by using only one IVAO connection.


The connector will be used to provide secondary view(s) (pilot, ATC) to the main view.

NOTE: pay attention that the secondary view can only display a limited range of the traffic in function of the position of the primary connection.

Launching the connector

When you launch the connector application, you will find this window like the image below:
Connector 1.png


You can select the IVAO server in the connector application like the image below.:
Connector 2.png
Note: This server will be used for the primary connection only.


If there is any connection error, the connector application will display the error message like the image below:
Connector 3.png


When this error occurs, please verify the server connection or your login and password inserted in the primary connection.



Connecting client to the connector

The main use of the connector is to have the tower view with your simulator when connected with the IVAO ATC software.


The first connection to the IVAO connector will be the primary and active connection to the IVAO network. The chosen client shall connect the connector by inserting the computer Ip which runs the connector software:

Example: IVAO ATC Software Aurora connection window using callsign: IVAO-DM1.

Aurora connection.png
Note: If the client and connector are run on the same computer, use the local Ip = 127.0.0.1


When the connection is successful the connector will display a blue connection message, above the server selection zone, stating: Connected to IVAO as <Callsign>

Example: primary connection callsign is IVAO-DM1

Connector 4.png


The second connection to the IVAO connector will be the secondary and non-active connection. The chosen client shall connect the connector by inserting the computer Ip which runs the connector software:

Example: IVAO Pilot Software Altitude Connection window using callsign: VAOTDAM.

Altitude connection.png


When the connection is successful the connector will display a grey connection message, below the server selection zone, stating: Secondary connection : <Callsign>

Example: Secondary connection callsign is VAOTDAM.

Connector 5.png


Note: secondary clients cannot have an effect on the network (like edit strip, send position)
You can connect to the IVAO connector as many secondary non-active connections with any allowed IVAO client (there is no limitation):

Example: Secondary connection callsigns are VAOTDAM and IVAO-SRTA22.

Connector 6.png



See also

Reference

  • None

Author

  • VID 150259 - Creation

DATE OF SUBMISSION

  • 12:54, 22 December 2019

COPYRIGHT

  • This documentation is copyrighted as part of the intellectual property of the International Virtual Aviation Organisation.

DISCLAIMER

  • The content of this documentation is intended for aviation simulation only and must not be used for real aviation operations.